AMD Geode LX DB800 Windows CE 5.0 OEM Adaptation Layer Driver Release Notes 
Version 1.01.09, General Release
November 14, 2006

--------------------------------------------------------------------------------
PRODUCT INFORMATION  
--------------------------------------------------------------------------------
This OAL (OEM Adaptation Layer) is based on the AMD Geode LX processor and 486 
OAL shipped with the Platform Builder. Power Management is supported in the OAL 
through a BIOS/Loader call.

Features
--------
- Support for S1 or S3 suspend options.
- Support for serial and Ethernet KITL.
- Seamless suspend/res
ume across multimedia playback.
- OHCI USB support including proper handoff between legacy and interrupt-based operation.

Dependencies 
------------
WinCEPB50-051231-Product-Update-Rollup-X86
WinCEPB50-060131-2006M01-X86
WinCEPB50-060228-2006M02-X86
WinCEPB50-060331-2006M03-X86
WinCEPB50-060430-2006M04-X86
WinCEPB50-060531-2006M05-X86
WinCEPB50-060630-2006M06-X86
WinCEPB50-060731-2006M07-X86
WinCEPB50-060831-2006M08-X86
WinCEPB50-060930-2006M09-X86

Functional Changes
------------------
None 

Defects Corrected 
-----------------
Bug #8482 (normal): A couple 5536 parts exhibit bad USB behavior.
Fixed no serial debug message issue.

Known Errata 
------------
When booting the image with a MacPhyter card, KITL should be disabled.

--------------------------------------------------------------------------------
VALIDATION ENVIRONMENT
--------------------------------------------------------------------------------
Validated on: SP4GX30, version 3 rework E
- Geode LX processor, silicon revision C1 @ 500 MHz
- Geode CS5536 companion device, silicon revision B1
- 512 MB RAM DDR @ 400 MHz
- PCI @ 66 MHz
- Windows CE 5.0 (1400)
- GeodeLX GeodeROM v1.09.05
- Audio 1.01.00
- Graphics 2.04.00
- OAL 1.01.09
- AES 2.01.00	


--------------------------------------------------------------------------------
INSTALLATION INSTRUCTIONS  
--------------------------------------------------------------------------------

Installation.
*************
1) Create $(_WINCEROOT)\Platform\GeodeLX dir
2) Copy all the files  to $(_WINCEROOT)\PLATFORM\GeodeLX
3) Import the GeodeLX.cec file into the catalog.

--------------------------------------------------------------------------------
CONFIGURATION INSTRUCTIONS  
--------------------------------------------------------------------------------
Set BSP_SUSPENDS3=1 to put the device to S3 state when the system is suspended.
Set BSP_SUSPENDS1=1 to put the device to S1 state when the system is suspended.
If both the flags are not defined or both are defined, then the device will go
to S1 on a suspend.

Set BSP_SKITL=1 to build a image with serial kitl support. Copy the image to 
the ce boot disk and boot locally. The image will block untill the Platform builder
copnnects to it. Configure the connectivity options from Target-->Connectivity Options
menu. Set the Download option to be none and Set the Transport Option as Serial.
Set the buadrate=115220, 8, N, 1, no h/w flow control. Save the settings.
Now select Target-->Attach Device from the menu. 

--------------------------------------------------------------------------------
BUILD INSTRUCTIONS
--------------------------------------------------------------------------------
1) Create a platform using this BSP
2) Add the neccessary drivers.
3) Build your platform in the normal way.



================================================================================
Copyright
---------
 2006 Advanced Micro Devices, Inc. All rights reserved.
The contents of this document are provided in connection with Advanced Micro 
Devices, Inc. (AMD) products. AMD makes no representations or warranties 
with respect to the accuracy or completeness of the contents of this 
publication and reserves the right to make changes to specifications and product 
descriptions at any time without notice. No license, whether express, implied, 
arising by estoppel or otherwise, to any intellectual property rights is granted 
by this publication. Except as set forth in AMDs Standard Terms and Conditions 
of Sale, AMD assumes no liability whatsoever, and disclaims any express or 
implied warranty, relating to its products including, but not limited to, the 
implied warranty of merchantability, fitness for a particular purpose, or 
infringement of any intellectual property right. AMDs products are not designed, 
intended, authorized or warranted for use as components in systems intended for 
surgical implant into the body, or in other applications intended to support or 
sustain life, or in any other application in which the failure of AMDs product 
could create a situation where personal injury, death, or severe property or 
environmental damage may occur. AMD reserves the right to discontinue or make 
changes to its products at any time without notice.


Trademarks
----------
AMD, the AMD Arrow logo, and combinations thereof, and Geode are trademarks of 
Advanced Micro Devices, Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the 
United States and/or other jurisdictions.
 
Other product names used in this publication are for identification purposes only 
and may be trademarks of their respective companies.
================================================================================