#
# IPMI device configuration
#

menu "IPMI"
config IPMI_HANDLER
       tristate 'IPMI top-level message handler'
       help
         This enables the central IPMI message handler, required for IPMI
	 to work.

         IPMI is a standard for managing sensors (temperature,
         voltage, etc.) in a system.

         See <file:Documentation/IPMI.txt> for more details on the driver.

	 If unsure, say N.

config IPMI_PANIC_EVENT
       bool 'Generate a panic event to all BMCs on a panic'
       depends on IPMI_HANDLER
       help
         When a panic occurs, this will cause the IPMI message handler to
	 generate an IPMI event describing the panic to each interface
	 registered with the message handler.

config IPMI_PANIC_STRING
	bool 'Generate OEM events containing the panic string'
	depends on IPMI_PANIC_EVENT
	help
	  When a panic occurs, this will cause the IPMI message handler to
	  generate IPMI OEM type f0 events holding the IPMB address of the
	  panic generator (byte 4 of the event), a sequence number for the
	  string (byte 5 of the event) and part of the string (the rest of the
	  event).  Bytes 1, 2, and 3 are the normal usage for an OEM event.
	  You can fetch these events and use the sequence numbers to piece the
	  string together.

config IPMI_DEVICE_INTERFACE
       tristate 'Device interface for IPMI'
       depends on IPMI_HANDLER
       help
         This provides an IOCTL interface to the IPMI message handler so
	 userland processes may use IPMI.  It supports poll() and select().

config IPMI_SI
       tristate 'IPMI System Interface handler'
       depends on IPMI_HANDLER
       help
         Provides a driver for System Interfaces (KCS, SMIC, BT).
	 Currently, only KCS and SMIC are supported.  If
	 you are using IPMI, you should probably say "y" here.

config IPMI_SMB
       tristate 'IPMI SMBus handler'
       depends on IPMI_HANDLER
       select I2C
       help
         Provides a driver for a SMBus interface to a BMC, meaning that you
	 have a driver that must be accessed over an I2C bus instead of a
	 standard interface.  This module requires I2C support.  Note that
	 you might need some I2C changes if CONFIG_IPMI_PANIC_EVENT is
	 enabled along with this, so the I2C driver knows to run to
	 completion during sending a panic event.

config IPMI_WATCHDOG
       tristate 'IPMI Watchdog Timer'
       depends on IPMI_HANDLER
       help
         This enables the IPMI watchdog timer.

config IPMI_POWEROFF
       tristate 'IPMI Poweroff'
       depends on IPMI_HANDLER
       help
         This enables a function to power off the system with IPMI if
	 the IPMI management controller is capable of this.

config IPMI_EMULATE_RADISYS
       tristate 'Emulate Radisys IPMI driver'
       depends on IPMI_HANDLER
       help
         This enables emulation of the Radisys IPMI device driver.

config IPMI_EMULATE_IMB
       tristate 'Emulate Intel IMB driver'
       depends on IPMI_HANDLER && IPMI_WATCHDOG
       help
         This enables emulation of the Intel IMB device driver.  Note that you 
	 MUST have the IPMI watchdog timer enabled to use this.  This code
	 uses some of the watchdog code.

endmenu
