*****************************************************************************
                               BLDUW.TXT
*****************************************************************************
LSI Logic SDMS 4.0 PCI SCO UnixWare C8XX HBA Diskette Building Instructions


To create a C8XX HBA diskette to use with UnixWare 2.1.X and UnixWare 7, you 
must copy the raw dd image file onto a 1.44 Mbytes floppy diskette. The process
for doing this depends upon what operating system you are using to create 
the diskette.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For UNIX System Users

Follow these steps to create the BTLD diskette: 

1.  Insert a 3.5" diskette into the floppy diskette drive. 
    
    At the UNIX prompt, type: 

    dd if=/<path>/unixware.dd of=/dev/rfd0

    The <path> is where the dd image is located.

2. For UnixWare 2.1.X, the dd image file is located here:

    {UNIX CD-ROM path}/DRIVERS/UNIXES/UNIXWARE/UW21X/UNIXWARE.DD 

3. For UnixWare 7, the dd image file is located here:

    {UNIX CD-ROM path}/DRIVERS/UNIXES/UNIXWARE/UW7/UNIXWARE.DD

This command will dd the image to the floppy diskette to create a BTLD diskette. 
 
*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For DOS System Users

1.  Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy
    diskette. RAWRITE3.COM, which is a public domain utility, is available
    on this CD-ROM.  Instructions for using this utility are included in its 
    accompanying RAWRITE3.DOC file. See below for further details.

2. For UnixWare 2.1.X, the dd image is located here:

    {DOS CD-ROM path}:\DRIVERS\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD

3. For UnixWare 7, the dd image is located here:

    {DOS CD-ROM path}:\DRIVERS\UNIXES\UNIXWARE\UW7\UNIXWARE.DD

4. RAWRITE3.COM is included on this CD-ROM at this location: 

    {DOS CD-ROM path}:\DRIVERS\UNIXES\RAWRITE3.COM

    After the image has been copied to a 3.5" floppy diskette, use this BTLD 
    diskette for SCO UnixWare installations as instructed.

   