************************************************************
************************************************************
*
*  Intel(R) Application Accelerator for Microsoft* Windows*
*  98, Windows 98 Second Edition(SE), Windows Millennium 
*  Edition(Me), Windows NT* 4.0, Windows 2000, and Windows
*  XP* Installation Readme
*
*  This document makes references to products developed by
*  Intel. There are some restrictions on how these products
*  may be used, and what information may be disclosed to
*  others. Please read the Disclaimer section at the bottom
*  of this document, and contact your Intel field
*  representative if you would like more information.
*
************************************************************
************************************************************

************************************************************
*  Intel is making no claims of usability, efficacy or 
*  warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
*  herein completely defines the license and use of this 
*  software.
************************************************************

************************************************************
*  CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1.  Overview
2.  System Requirements
3.  Language Support 
4.  Installing the Software
5.  Verifying Installation of the Software
6.  Advanced Installation Instructions
7.  Identifying the Software Version Number
8.  Uninstalling the Software

************************************************************
* 1.  OVERVIEW
************************************************************

The Intel(R) Application Accelerator is designed to improve
performance of the storage sub-system and overall system
performance.  This software delivers improved performance
through several ingredient technologies (components).
Certain components will be available only on Pentium(R) 4
processor-based systems running Microsoft Windows 2000 and
Windows XP. Software  installation is flexible and fully
automated for Microsoft Windows 98, Windows 98 Second
Edition(SE), Windows Millennium Edition(Me), Windows
NT 4.0, Windows 2000, and Windows XP operating systems.

************************************************************
* 2.  SYSTEM REQUIREMENTS
************************************************************

1.  The system must contain the following Intel products:

	* Intel(R) Pentium(R) III or Pentium(R) 4 processor	 
	* Intel(R) 82801AA, 82801AB, 82801BA or 82801DB
          controllers

2.  The kit software should be installed on systems with at
    least the minimum system memory required by the
    operating system.

3.  Microsoft Windows 98, Windows 98 Second Edition(SE), 
    Windows Millennium Edition(Me), Windows NT 4.0, 
    Windows 2000, or Windows XP.

4.  Installation of the Intel(R) Chipset Software 
    Installation Utility prior to loading the Intel(R)
    Application Accelerator.

************************************************************
* 3.  LANGUAGE SUPPORT
************************************************************

Below is a list of the languages (and their abbreviations)
into which the driver component of the Intel(R) Application
Accelerator has been localized.  The language code is
listed in parentheses after each.  You may have to refer to
this section while using this document.

chs -> Chinese (Simplified) (0804)
cht -> Chinese (Traditional) (0404)
csy -> Czech (0005)
dan -> Danish (0006)
nld -> Dutch (0013)
enu -> English (United States) (0009)
fin -> Finnish (000B)
frc -> French (Canada) (0C0C)
fra -> French (Standard) (040C)
deu -> German (0007)
ell -> Greek (0008)
hun -> Hungarian (000E)
ita -> Italian (0010)
jpn -> Japanese (0011)
kor -> Korean (0012)
nor -> Norwegian (0014)
plk -> Polish (0015)
ptb -> Portuguese (Brazil) (0416)
ptg -> Portuguese (Standard) (0816)
rus -> Russian (0019)
esp -> Spanish (000A)
sve -> Swedish (001D)
tha -> Thai (001E)
trk -> Turkish (001F)

************************************************************
* 4.  INSTALLING THE SOFTWARE
************************************************************

General Installation Notes:

1.  The operating system and the Intel(R) Chipset Software
    Installation Utility must be installed on the system
    prior to installation.

2.  Click on the self-extracting and self-installing setup 
    file and answer all prompts presented.

3.  You will be prompted to reboot when installation is 
    complete.

Note:
  
By default, all general files (README.TXT, etc.) are copied 
to the path <bootdrive>:\Program Files\Intel\Intel
Application Accelerator 
	
4.1.  INSTALLSHIELD* (AUTOMATED) INSTALL FROM HARD DRIVE OR
      CD-ROM

1.  Download the Intel(R) Application Accelerator
    setup file and double-click to self-extract and to 
    begin the setup process.

2.  The Welcome window appears. Click on the Next button to 
    continue.

3.  The Software License Agreement window appears. If you 
    agree to these terms, click on the Yes button and the 
    driver begins to install.

4.  The Setup Complete window appears. Select "Yes, I 
    want to restart my computer now" and click on the Finish
    button. 

5.  To verify if the driver has been loaded correctly, refer
    to Section 5.

************************************************************
* 5.  VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************

1.  The verification of the Intel(R) Application Accelerator
    is different on a per operating system basis.  Please
    refer to the correct operating system subsection for
    details.

A.  Microsoft* Windows* 98, Windows 98 Second 
    Edition, and Windows Millennium Edition

* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Device Manager' tab
* Expand the 'Hard Disk Controllers' entry
* Select the 'Intel 82801xx Ultra ATA Controller' listed, 
  where xx in 82801xx represents the controller identified 
  by the 'System Requirements' section of this document
* Select the 'Properties' button
* Select the 'Driver' tab
* Select the 'Driver File Details' button
* 'IntelATA.MPD' and 'Intelvsd.VXD' should be 
  displayed

B. Microsoft* Windows* NT* 4.0

* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'SCSI Adapters'
* Select the 'Devices' tab
* 'IntelATA' or 'Intel Ultra ATA Controller' 
  should be displayed

C. Microsoft* Windows* 2000

* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Hardware' tab
* Select 'Device Manager' button
* Expand the 'IDE ATA/ATAPI Controllers' entry
* Right-click on the 'Intel 82801xx Ultra ATA Controller' 
  listing, where xx in 82801xx represents the 
  controller identified by the 'System Requirements' 
  section of this document 
* Select 'Properties'
* Select the 'Driver' tab
* Select the 'Driver Details' button
* 'IdeChnDr.SYS', IdeBusDr.SYS, and IPrtCnst.DLL
  should be displayed

D. Microsoft* Windows* XP

* Run 'Start' then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Hardware' tab
* Select 'Device Manager' button
* Expand the 'IDE ATA/ATAPI Controllers' entry
* Right-click on the 'Intel 82801xx Ultra ATA Controller' 
  listing, where xx in 82801xx represents the 
  controller identified by the 'System Requirements' 
  section of this document 
* Select 'Properties'
* Select the 'Driver' tab
* Select the 'Driver Details' button
* 'IdeChnDr.SYS', IdeBusDr.SYS, and IPrtCnst.DLL
  should be displayed

************************************************************
* 6.  ADVANCED INSTALLATION INSTRUCTIONS
************************************************************

The following  SETUP flags are available:
  -?           	   Help information for the setup flags 
		   (shown below)
  -S           	   Silent install (no user prompts)
  -B           	   Forces a system reboot after installation
  -P <path>    	   Supplies target installation path
  -A           	   Extracts all driver files (does not install 
		   driver) to <path> if -P is also supplied, or 
               	   the default directory otherwise
  -N           	   Installs all components except driver
  -O <name>    	   Supplies target Start Menu Program Folder 
               	   name if installing Companion applet
  -L <lang code>   Forces a particular language install (See 
		   Section 3 for a table mapping <lang code> 
               	   to language)
  -build       	   Displays build number
  -f2 <path\name>  Creates a log file in <path> with <name>;
		   this is to be used during silent
		   installation.
  -noqfe       	   Prevents Microsoft patch from being
                   installed.  The patch prevents a blue screen
                   from occurring when attempting to play audio
                   content from CDs in digital mode on
                   Windows 98, Windows 98 SE, and Windows Me.
  -PIO_ALL	   Causes all devices installed in system to run
                   in standard PIO transfer mode rather than
                   optimal transfer mode.  Useful for
                   troubleshooting device issues.


*** "Package-for-the-web" requires that an additional -A be
placed before any flag.  Therefore, an example file extraction
would be IATA_CD -A -A -P C:\<path> ***

Notes:  Flags and their parameters are not case-sensitive.  
        Flags may be supplied in any order, with the 
	exception of the -S and -L flags which must be 
	supplied last.  When using the -A flag, a target 
        path may be specified via the -P flag, and the -O, 
        -L, -S, and -N flags are ignored.  When using the -P 
        or -O flags, a space is required between the flag 
        and the argument; when using -L and -f2, however, there 
        should be no space.  When using the -f2 flag,
	a log file name and path must be specified.

To load just the driver as outlined in the Microsoft*
document, "Deployment Guide Automating Windows NT Setup," 
use the supplied TXTSETUP.OEM file included in this 
package and insert the lines below into the UNATTEND.TXT 
file.  This method is available for Microsoft* Windows* 
NT* 4.0, Windows 2000, and Windows XP. (For Windows NT 4.0,
the TXTSETUP.OEM, INTELATA.INF, and INTELATA.SYS files need to
first be extracted from the compressed .CAB file.  For
Windows 2000 and Windows XP, the idechndr.inf, IdeBusDr.sys,
idechndr.sys, and Txtsetup.oem files need to be extracted.
To extract these files, run 'SETUP -A -P <path>' as described
above.)

Microsoft Windows NT 4.0:
  // Insert the lines below into the UNATTEND.TXT file
  
  [MassStorageDrivers]
  "Intel Ultra ATA Controller" = OEM

  [OEMBootFiles]
  INTELATA.INF
  INTELATA.SYS
  TXTSETUP.OEM

Microsoft Windows 2000 and Windows XP:

  // Insert the lines below into the UNATTEND.TXT file
  
  [MassStorageDrivers]
  "Intel(R) 82801BA Ultra ATA Controller" = OEM
  "Primary IDE Channel" = OEM
  "Secondary IDE Channel" = OEM 
 
  [OEMBootFiles]
  idechndr.inf
  IdeBusDr.sys
  IdeChnDr.sys
  Txtsetup.oem

The IprtCnst.dll file must be placed in the following
folder in your directory structure in order to be loaded
during driver installation:

C:\I386\$Oem$\$$\System32

Please refer to the following Microsoft Knowledge Base
article for information on why the IprtCnst.dll file
cannot be listed in the [OEMBootFiles] location in the
unattend.txt file:

http://support.microsoft.com/support/kb/articles/Q275
/3/34.ASP?LN=EN-US&SD=gn&FR=0&qry=Q275334&rnk=1&src=
DHCS_MSPSS_gn_SRCH&SPR=CHS

************************************************************
* 7.  IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************

1.  The identification of the Intel(R) Application
    Accelerator software version number is different on a
    per operating system basis.  Please refer to the correct
    operating system subsection for details.

A.  Microsoft* Windows* 98, Windows 98 Second 
    Edition, and Windows Millennium Edition

* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Device Manager' tab
* Expand the 'Hard Disk Controllers' entry
* Select the 'Intel 82801xx Ultra ATA Controller' listed, 
  where xx in 82801xx represents the controller identified 
  by the 'System Requirements' section of this document
* Select the 'Properties' button
* Select the 'Driver' tab
* Select the 'Driver File Details' button
* Click on 'INTELATA.MPD' or 'INTELVSD.VXD'
* The software version should be displayed after
  'File Version:'

B. Microsoft* Windows* 2000

* Run 'Start', 'Settings', then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Hardware' tab
* Select 'Device Manager' button
* Expand the 'IDE ATA/ATAPI Controllers' entry
* Right-click on the 'Intel 82801xx Ultra ATA Controller' 
  listing, where xx in 82801xx represents the 
  controller identified by the 'System Requirements' 
  section of this document 
* Select 'Properties'
* Select the 'Driver' tab
* The software version should be displayed after
  'Driver Version:'

C. Microsoft* Windows* XP

* Run 'Start' then 'Control Panel'
* Double-click 'System' Control Panel Application
* Select the 'Hardware' tab
* Select 'Device Manager' button
* Expand the 'IDE ATA/ATAPI Controllers' entry
* Right-click on the 'Intel 82801xx Ultra ATA Controller' 
  listing, where xx in 82801xx represents the 
  controller identified by the 'System Requirements' 
  section of this document
* Select 'Properties'
* Select the 'Driver' tab
* The software version should be displayed after
  'Driver Version:'

************************************************************
* 8.  UNINSTALLING THE SOFTWARE
************************************************************

NOTE: This procedure assumes that the above installation
      process was successful. This un-installation procedure
      is specific only to the version of the software and
      installation file included in this package.

1.  Click on the Start button.  Open the Settings menu.  
    Click on the Control Panel icon to open the Control 
    Panel window.

2.  Click on the Add/Remove programs icon.  

3.  Select Intel(R) Application Accelerator and click OK. 

4.  Click on Yes when the script prompts for confirmation.

5.  The uninstall script will prompt you to restart the 
    system.


Uninstall procedure for Windows NT 4.0:

NOTE: This procedure assumes that the above un-installation
      procedure is not applicable.

1.  Click on the Start button.  Open the Settings menu.  
    Click on the Control Panel icon to open the Control Panel 
    window.

2.  Double click on the SCSI Adapters tab.

3.  Select the Drivers tab.

4.  Select 'Intel Ultra ATA Controller' and then select the
    Remove button.

5.  Select the Add button and choose the default driver
    'IDE CD-ROM (ATAPI 1.2)/Dual-Channel PCI IDE Controller'.

6.  Choose OK and select Yes to restart your system.


Copyright (c) Intel Corporation, 1998-2002

************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
************************************************************

INTEL SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

Please Also Note:
* If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies.

For OEMs, IHVs, and ISVs:

LICENSE. This Software is licensed for use only in conjunction with Intel component products.  Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to you a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to:
	a) use, modify and copy Software internally for your own development and maintenance purposes; and
	b) modify, copy and distribute Software, including derivative works of the Software, to your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and
	c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software.

If you are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then you may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof.  You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or right is granted to you directly or by implication, inducement, estoppel or otherwise.  Intel shall have the right to inspect or have an independent auditor inspect your relevant records to verify your compliance with the terms and conditions of this Agreement.

CONFIDENTIALITY. If you wish to have a third party consultant or subcontractor ("Contractor") perform work on your behalf which involves access to or use of Software, you shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose.
Otherwise, you shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent.  You do not have any rights to use any Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.  Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.


EXHIBIT "A" 
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 
Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions: 
1. This Software is licensed for use only in conjunction with Intel component products.  Use of the Software in conjunction with non-Intel component products is not licensed hereunder. 
2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software. 
4. You may not sublicense or permit simultaneous use of the Software by more than one user.
5. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.  Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software.

LIMITATION OF LIABILITY.  IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.
 
SLAOEMISV1/RBK/01-21-00

